Turbo-to-intake adapter cone o-rings

[FlaBoy]

I just pulled my turbo for the first time, and I was wondering if before I re-install it I should replace the o-rings on the cone-shaped adapter between the turbo outlet and intake manifold. If so (as i assume) where can these be bought? I read through some old threads that said limit engineering sold them, is this still true? Anyplace else I should check?

 

[novaderrik]

NAPA has a turbo mouting seal kit for not too much money.

 

[turbofish38]

FelPro sells a turbo installation kit with them too. The Napa part is probably a repackaged FelPro anyway.

 

[FlaBoy]

Thx guys!! I've got a few parts (plugs, etc.) I need to pick up from the local napa, so that works out well.

 

[TurboRegal84]

Should cost you under $20.00

Felpro Part #ES72660

Here is a picture of what is included:

 

[FlaBoy]

Now youve got me curious; what're the smaller o-rings and the gasket for?

 

[novaderrik]

probably throttle body related.

 

[TurboRegal84]

Gasket is for the throttle body to turbo connection. Believe the O rings are for the injectors.

 

[TType84]

wow, nice find. always had issues getting these from GM dealers back in the day, would just have to go root around in their parts bins to try to find some that were close enough. good to see felpro sells em!

 

[Rottydogg84GN]

Advance Auto also has them. Just bought a set. They are the felpero set. It takes a few days to get them in.

 

[novaderrik]

Advance Auto also has them. Just bought a set. They are the felpero set. It takes a few days to get them in.

that's why i prefer NAPA- all the NAPA stores i've ever been to can get everything the next day.

 

[Rottydogg84GN]

sometimes that is true but you pay more there at least here in IL:smile: