OK Just to sum it up.
Head lights: work
Front and rear turn signals: work
Brake lights: work
Dash lights: work
Took out the dash bezel and pulled the headlight switch. I removed it from the housing, cleaned the connectors and plugged it into the connector.....solid connection. Tail light still does not work.
There is power to the tail light fuse. I swapped out the fuse for the hell of it. With the fuse out....I put a volt meter and got 12v. With the fuse in....I used a fuse tester and got a green light saying the fuse was good. Could not get 12v from the back of the fuse. Not sure if that is normal or not. Hard to get the voltmeter leads on the back of the fuse.
Kinda confused. Looked up the bulb chart on the sylvania site. It says the 2057 bulbs are the tail lights and the 194 are the turn signals. When I hit the turn signals....the 2057 bulbs are blinking. Is this correct?