Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
So here we are in Florida with very few tools and I just bumped into a no start condition. After the WOT bogging down situation solved with a used coil pac/ignition module and the car was running better than ever for about a month, last night I go start it and no go.
There is fuel at the fuel rail but I have no pressure gauge available so I don't know what pressure (car was in a shop in Naples 6 weeks ago and both FP (43 psi) and flow were good). I tested spark in two plug wires/plugs and there is consistent spark in both.
I am going to use a circuit tester in a few minutes to check out fuses. Going to start with ECM and C3I ones.
Any other suggestions ?
Good thing I don't get discouraged easily huh!
There is fuel at the fuel rail but I have no pressure gauge available so I don't know what pressure (car was in a shop in Naples 6 weeks ago and both FP (43 psi) and flow were good). I tested spark in two plug wires/plugs and there is consistent spark in both.
I am going to use a circuit tester in a few minutes to check out fuses. Going to start with ECM and C3I ones.
Any other suggestions ?
Good thing I don't get discouraged easily huh!