KENNE BELL CAM

[ROTTWEILER]

I found some paperwork on my 87 GN that I have owned since 1995. It seems the car has a Kenne Bell MK1TXB EF 231 CAM (TURBO) and lifters KB10002 installed. I did a search to find the specs and his catalog but was unsuccessful, if anyone has information on this I sure would appreciate it. The car runs fine, it's one of those would like to know things. I'm sure the newer profiles are much more efficent but " it is what it is", I guess. Thanks again for any information.

 

[mikestertwo]

If memory serves me right...208/208, .465 lift, 114* centers. I have a cam card at home. I will take a look to verify if no one else has.

 

[mikestertwo]

Found the cam card. My memory is better than I thought Cam lift: 290/290 Duration: 208/208 Lobe Center: 114*. INT. open -6* close 34* @.050. EXH. open 42* close -14* @.050. Valve lift with 1.6 rockers .464, Valve lift with 1.55 rockers .450

 

[Brent]

Yep that's correct. That's the one I'm running as well

 

[ROTTWEILER]

Thank you for taking time and posting.