williambavila
William Avila (The Buick Guy)
- Joined
- May 11, 2010
Need a bit of help, I have a car here that hasn't ran in years, I finally got the engine installed and noticed the module plug was a little screwed up. The 1st wire torwards front of the car was broke. I replaced the pin/plug and car will start but will not stay running without tps around 1.0ish(foot on pedal) if I keep it running the headers get REALLY hot and turn red.
My initial thought is the connector may be having issues making contact and it's throwing a code 42 only, chip and injectors match, fp is set at 43psi, blms are about 150 with my foot on pedal. Any other ideas? Replaced coil/module with known working one too.
My initial thought is the connector may be having issues making contact and it's throwing a code 42 only, chip and injectors match, fp is set at 43psi, blms are about 150 with my foot on pedal. Any other ideas? Replaced coil/module with known working one too.