1980 Turbo Trans Am
- Thread starter mypontiac
- Start date
Neil Smedley
New Member
- Joined
- Jun 17, 2001
Type " 301 turbo shrine " into Google.......There is loads of information on these pages
berrelauto
New Member
- Joined
- Feb 20, 2003
Sell me the car. 
b4black
Well-Known Member
- Joined
- May 24, 2001
I think the key is a boost gauge and knock monitoring. (Not sure how I would monitor knock on a pre-ECM car.)
Washer pump alcohol injecitons is the best bang for buck, IMO.
What works for the Buick Turbo V6 will apply to the 301T:
http://home.flash.net/~rjgeorge/racing.htm
Washer pump alcohol injecitons is the best bang for buck, IMO.
What works for the Buick Turbo V6 will apply to the 301T:
http://home.flash.net/~rjgeorge/racing.htm
mike brush
New Member
- Joined
- Jun 29, 2004
I have an 80' T/A also...
First remove all the smog equipment and free up the exhaust -
then start adding/changing things...
My single best addition so far is the MSD 6AL ignition...
When you're ready, Turbonetics can upgrade your turbo to a T3/T4 hybrid for about $700.00...
Oh...Get a boost gauge - It really helps!!!
That 301 Turbo Shrine is a great resource,
but I got some of my best info from the link B4Blk
gave you above (Thanks, man!)...
Best of luck!
M.
First remove all the smog equipment and free up the exhaust -
then start adding/changing things...
My single best addition so far is the MSD 6AL ignition...
When you're ready, Turbonetics can upgrade your turbo to a T3/T4 hybrid for about $700.00...
Oh...Get a boost gauge - It really helps!!!
That 301 Turbo Shrine is a great resource,
but I got some of my best info from the link B4Blk
gave you above (Thanks, man!)...
Best of luck!
M.
