Just let me know when you're ready! I have a Sema C10 truck showing up this week for a full custom stainless steel exhaust then should have an open spot. I've also got two more private track day events planned, Saturday November 18th and Sunday December 10th. Let me know if you plan on making it and we'll be sure to do your up pipe by then!
Haven't had much of an update as far as progress as I've been working on my house a bit and customer's cars to pay for GN parts.
Just wanted to give a huge thanks to Rick Elam @ Baer brakes for setting me up with all of the parts I need to get my car stopped. He was great to deal with as always and should be your source for all of your braking needs.
Thanks! Shooting for bottom 8's, possibly an upper 7 sec pass if all goes well. As far as half mile speeds, I feel I will be aero limited but would still like to crack 190+ possibly 200 but time will tell...
I'll be working on the trans mount next to finalize the final engine angle so I can start building my headers next. I'll more than likely be purchasing the turbos in the next few weeks as well so that will help with location.
Thanks! Shooting for bottom 8's, possibly an upper 7 sec pass if all goes well. As far as half mile speeds, I feel I will be aero limited but would still like to crack 190+ possibly 200 but time will tell...
I'll be working on the trans mount next to finalize the final engine angle so I can start building my headers next. I'll more than likely be purchasing the turbos in the next few weeks as well so that will help with location.