WRE 10/10 3.55 Stroker Crank

[Mad_Trbo]

I've got a Crank I purchased in a shortblock assembly from Weber Racing. The stroke is a 3.55 the mains and rods turned .010 under. Reason for sale went with a 4.1 block and their 3.625 stroke crank.

Cost is $400 plus shipping.

 

[LOT]

???

Does this crank take SBC rod bearings??

 

[Mad_Trbo]

Sbc

Yes the bearings I used for my build were a calico coated bearing

4m960p - mains
1b663h10 - rods

I did need to have the bearing narrowed for proper fitment.

With my 4.1 build I went away from the softer passenger bearings listed her to a hardened bearing.

 

[1chance]

Can this be used in a stock 109, or 4.1 ?

 

[getchasum]

Can this be used in a stock 109, or 4.1 ?

Yes, with a custom rod & piston combo

 

[Mad_Trbo]

Rod / Piston combination

I believe the rod length used was a 5.960 and the compression height on the piston will have to be determined by you based on deck height and where you want the piston in the hole at TDC.

 

[1chance]

location

how far you live from Augusta,GA? Can I drive over, and pick it up. put in first. can get it this weekend.

 

[Mad_Trbo]

Still Available

Crank is still available for those of you looking to spend a little of that christmas cheddar collection.

 

[Mad_Trbo]

Still for sale

Ttt

 

[Mad_Trbo]

Crank is Still Available

Cranks still available, thanks for looking!

 

[bison]

I cant believe this is still available. That is a great deal.

 

[TurboStitches]

How much to ship to PA 15106?

 

[Mad_Trbo]

Cost to ship

How much to ship to PA 15106?

Looks like cost to ship is estimated at $30. I put an estimated weight of 45lbs. If you are interested and it ends up costing more, I'll cover the difference.

 

[Mad_Trbo]

Crank is still available. $ 275 and you cover shipping and fees.

I need it out of my storage facility.


Just as a heads up, depending on how particular you are. You may have to turn the journals again.

 

[charlief1]

I can store it for ya for free if you want.

 

[charlief1]

Didn't realize you were in Dallas. We need to chat a little. I'll PM my number to you.

 

[Dlynch1130]

I am interested. Why do you suggest that the journals may need to be turned again?

 

[Mad_Trbo]

Crank is sold, thanks for all the interest.