Urgent Request! 3.5" Maf Won't Fit Trans Plus

[FAMLYKAR]

I'm stuck...The Trans plus connector does not fit my 3.5" MAF. Do I need an adaptor? I am sitting in Lawrence Kansas (From Madison WI) with the spark wire cut, waiting to drive to Bowling Green for the Nationals.

Helllllllllllllllllllllllllllllllllllllllllllp.

Thanx,
Todd

 

[Intercooler]

This is something I put together on another site. Only two plugs. One goes to the factory harness and the other to the MAF.


http://www.gnttype.org/techarea/ecmsensors/Translator1.JPG

 

[TurboDave]

there are basically three wire sets coming out of the Translator plus.

One is a two wire (for spark)

The others are three wire, the one with the "longest" plug, plugs into a short adapter which then plugs into the car's MAF harness

The other has a short plug on it. That plugs directly into the MAF.

 

[TurboDave]

Originally posted by Intercooler
This is something I put together on another site. Only two plugs. One goes to the factory harness and the other to the MAF.


http://www.gnttype.org/techarea/ecmsensors/Translator1.JPG

Phew! That's an old one!!!

 

[Intercooler]

Originally posted by TurboDave
Phew! That's an old one!!!

Oldy but a goodie! Got my friends car home when his factory MAF died and I have use it with a 3" and now 3.5" sensor with no problems.