A
atl gn
Guest
first gear stick
My trans has been having problems for a couple months. So I took off the pan and there was no crap in it or on the magnet. What it is doing is that it drives normally just fine and also under moderate accelleration. When you nail it, it gets hung up in first gear and then the rpm's fly up like it went into neutral and then it slides into second. I went and talked to the local trans man, and he said that if there is nothing in the pan my converter is probably wasted. Also, when I went to the track I brake torqued it up and something just gave and the drag radials didn't budge but the rpm's flew up like in neutral. So I called Bruce and got a converter. I put it in yesterday and nothing changed. My question is-what else can I check before rebuilding the trans and emptying my wallet again. I am not an expert on adjusting the throttle cable, so give me some tips on that. Thanks alot!
My trans has been having problems for a couple months. So I took off the pan and there was no crap in it or on the magnet. What it is doing is that it drives normally just fine and also under moderate accelleration. When you nail it, it gets hung up in first gear and then the rpm's fly up like it went into neutral and then it slides into second. I went and talked to the local trans man, and he said that if there is nothing in the pan my converter is probably wasted. Also, when I went to the track I brake torqued it up and something just gave and the drag radials didn't budge but the rpm's flew up like in neutral. So I called Bruce and got a converter. I put it in yesterday and nothing changed. My question is-what else can I check before rebuilding the trans and emptying my wallet again. I am not an expert on adjusting the throttle cable, so give me some tips on that. Thanks alot!