Just put a great billet century trans in my Buick. Shifts great and hard but I have a question.
when I checked the tps it was at 3.63 at wot and .44 at idle. I could not get it to go higher.
I slotted the holes and still the same. I then disconnected the tv cable and I noticed that the throttle goes to the stop now and before it was only going about 3/4 the way. I checked the tps with the tv cable disconnected and it goes to 4.63 at wot. So I reconnected the tv cable and readjusted it. When at wot the tv cable is tight and just flexes the the bracket the tv cable is connected to. The tv cable is very tight at wot.
Also before I did this it down shifted with a clunk from 3 to 2nd gear. I know the tv vavle is fully compressed at wot but how about part throttle? I just don't want to burn up this new trans.
when I checked the tps it was at 3.63 at wot and .44 at idle. I could not get it to go higher.
I slotted the holes and still the same. I then disconnected the tv cable and I noticed that the throttle goes to the stop now and before it was only going about 3/4 the way. I checked the tps with the tv cable disconnected and it goes to 4.63 at wot. So I reconnected the tv cable and readjusted it. When at wot the tv cable is tight and just flexes the the bracket the tv cable is connected to. The tv cable is very tight at wot.
Also before I did this it down shifted with a clunk from 3 to 2nd gear. I know the tv vavle is fully compressed at wot but how about part throttle? I just don't want to burn up this new trans.