In search of a shroud for what I believe is a 15 row accurate fabrications stretch slic. Also looking for the stock bracket. Prefer an aluminum shroud, or some kind of tin, or will modify stock to work.
If you don't find a used one, GN1 Performance sells a nice aluminum stock replacement that can be modified to work.
Make an adjustable bottom plate that bolts under the sway bar.
I know it's a little spendy to buy just to modify, but it seems the norm for my car anyway.
I bought a 3.5 maf pipe from Full Throttle just to cut/ rotate the filter end clockwise 1/2", weld, smooth, paint and shorten so it worked with my TA49, 85mm maf and KB ram air set up. But then again I like to run weird stuff.