natedog910
Member
- Joined
- Apr 7, 2015
been doing some reading so some say never had a problem and others not so good?
Sent from my SM-N950U using Tapatalk
![e0589e7559df637f4822edcf9aae2b89.jpg](/proxy.php?image=https%3A%2F%2Fuploads.tapatalk-cdn.com%2F20180710%2Fe0589e7559df637f4822edcf9aae2b89.jpg&hash=84c974102402460bb0bd0d7baa795bd5)
Sent from my SM-N950U using Tapatalk
Hell to the NO! Sealed power roller button-if you need the part number I can get it tomorrow.next question is this correct, I bought cam button at local hp dealer he said ,just use cam button no spring?![]()
Sent from my SM-N950U using Tapatalk
Hell to the NO! Sealed power roller button-if you need the part number I can get it tomorrow.next question is this correct, I bought cam button at local hp dealer he said ,just use cam button no spring?![]()
Sent from my SM-N950U using Tapatalk
does these cam button work
That's the one.
on a Hydraulic roller![]()
Sent from my SM-N950U using Tapatalk
No. That button is a needle bearing button from a 3800 high deck with a roller cam. I used one like that for years without issue on a flat tappet motor with the GM cam dimple. I don't see how you will achieve the clearances required with an aftermarket roller.does these cam button work
on a Hydraulic roller![]()
Sent from my SM-N950U using Tapatalk