This chip is still kicking my ass.
I've increased the injector size to 51lb, reduced the inj offset to 26, and I finally have it lean enough to cruise at 14.4-15.0 with only around -5% correction.
Now it's so lean cold it dies when I put it in gear, and has a lean stumble that's bad enough to have parameter 12 all the way up to 190 to get it cleared up a little, and parameter 11 up to around 160. The WB is reading in the 10s cold, and it smells that rich. Once it warms up and goes into closed loop, it's 13.5, and the stumble is all but gone.
WOT with the alky is still has the WB buried at 10.0, and it's sluggish as hell. I've changed parameters 7 and 8 to 125, and it's not getting any better.
My 5.7 chip was flawless....getting frustrated.