chuckfryer
New Member
- Joined
- Jun 18, 2004
Updated Scanmaster and PowerLogger were working fine for years. Attached fuel pressure sensor to PL data block. Now PL receives and displays data as before, including new FP reading, but the Scanmaster display has basically gone dark.
At key-on, Scanmaster displays "SCN 2.2" for a second, "PL" for about a second, then goes blank for 3 seconds, then shows six dashes (- - - - - -) for two seconds, then goes completely dark.
Any ideas? Thanks in advance.
At key-on, Scanmaster displays "SCN 2.2" for a second, "PL" for about a second, then goes blank for 3 seconds, then shows six dashes (- - - - - -) for two seconds, then goes completely dark.
Any ideas? Thanks in advance.