Well folks I’ve done most of the basics, it’s running better but still ugly. Hot wire, fuel pump, injectors, TT chip, FPR.
1. idles but stalls chokes and misses when I drop it in gear. I’ve now changed plugs twice. First set fouled. Changed all vacuums lines I could find.
2. Installed the adjustable fuel pressure regulator, its running at 70 psi. I can’t seem to turn it down. ( Racetronix). Turn the screw either way, fuel pressure goes up but doesn’t go below 70.
3. First thing I did was change the MAF and pipe with Translator. Sine I did that I’m getting codes 33 and 34. Completed the trouble shooting of these but can’t seem to find anything.
Other things I ve done, Cleaned IAC, Adjusted TPS.
All Scan perimeters seem to be in the zone.
1. idles but stalls chokes and misses when I drop it in gear. I’ve now changed plugs twice. First set fouled. Changed all vacuums lines I could find.
2. Installed the adjustable fuel pressure regulator, its running at 70 psi. I can’t seem to turn it down. ( Racetronix). Turn the screw either way, fuel pressure goes up but doesn’t go below 70.
3. First thing I did was change the MAF and pipe with Translator. Sine I did that I’m getting codes 33 and 34. Completed the trouble shooting of these but can’t seem to find anything.
Other things I ve done, Cleaned IAC, Adjusted TPS.
All Scan perimeters seem to be in the zone.