Red Armstrong volt booster
- Thread starter gngofast
- Start date
Charles Young
C Young
- Joined
- Sep 25, 2012
Pretty sure I have an old one from Red Armstrong if you are interested PM me,
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Awesome. Thanks for the reply.
Caspers electronics.com-everything you need
I know caspers has one, but I like the idea of one activated by boost vs throttle position. High boost comes on a lot faster tham 70% throttle does
V6-Sauce
Member
- Joined
- Aug 23, 2008
I use the RJC setup, with a new stock type wastegate with 1/8" of pull of the rod on the wastegate to reach the pin on the stock downpipe. Connecting controler from stock wastegate directly Turbo compressor. When adjusting the boost controler (rjc), |Start with the threads unscrewed all the way out. A couple of threads just to hold in place, depending on the boost you run. screw in to add boost.You maybe have to cut a couple of springs off the spring inside the controller valve to reduce boost if you can't lesser the boost. I love the spool up on this boost controler. In less it's a different setup, your thinking about. good luck
Last edited:
