Stock 15" wheels will fit. The regular price is $594.00
I bought them on sale I think is was $550.00
The Inline kit is similar No E Brake, Slotted Rotors, Red Powder coat
Yes had to pull the axles that was simple part
Removing the old dust plate and rear brake piston was PITA
The install was easy and decided to install new Mosser axles and new bearing and seals
Still need to do the E Brake but want to do it on a lift
Road tested and very happy
What I like about this kit was it holds the axle in so no C Clip eliminator
How is the frame clearance? What is your spring rate in the rear? Are you lowered?
There are some out there that say “for stock height vehicles only”. Just curious.
Thank you for the informative post.
I assume you need to replace the proportioning valve from disc/drum to disc/disc also ??
With the e-brake equipped calipers, the ebrake mechanism can contact the frame if you're lowered. Mine did when I tried those calipers with a similar kit. It'll depend on where the brackets clock the caliper and your springs. I had to swap out to non-ebrake calipers. Wilwood has a nice set that's a direct replacement for the calipers in the kit (Wilwood par number 120-9333).
Also, the knockback without C-clip eliminators is horrible. Be prepared to go for the pedal and have to pump it a few times to stop the car after going over something bumpy or an aggressive lateral maneuver. If you go for C-Clip eliminators, get the ones with the tapered bearings.
I believe these are the C-clip Eliminators you’re referring to.