Zacks 85GN
Zman
- Joined
- May 24, 2001
We are finally getting the motor together and started checking the pushrod length today. We are running an ATR 309G cam Kit with T/A Performance 1.6 roller rockers (T&D), and the roller lifters are Speed Pro's. We have taken the measurements with an adjustable pushrod gage. Do we need to add .030" to the measurements we got for the proper pushrod length? The speed pro lifters have a pretty good spring under the plunger and held the pushrod up really good.
Too bad ATR went under, we did not get the pushrods for our kit as we took too long get this motor together.
Our numbers are:
#1 ex 8.180" #2 ex 8.098"
#1 in 8.184" #2 in 8.158"
#3 ex 8.159" #4 in 8.143"
#3 in 8.170" #4 ex 8.121"
#5 in 8.177" #6 in 8.148"
#5 ex 8.1635" #6 in 8.135"
Kinda of all over the place.
Thanks,
Jim
Too bad ATR went under, we did not get the pushrods for our kit as we took too long get this motor together.
Our numbers are:
#1 ex 8.180" #2 ex 8.098"
#1 in 8.184" #2 in 8.158"
#3 ex 8.159" #4 in 8.143"
#3 in 8.170" #4 ex 8.121"
#5 in 8.177" #6 in 8.148"
#5 ex 8.1635" #6 in 8.135"
Kinda of all over the place.
Thanks,
Jim