PARTS NEEDED FOR RECENT BUILT!!!!!

[bmsv6]

86/87 I am doing a budget built right now motor & trans rebuilt and need the following parts low miles or new

1. Pistons STD size in good condition or even .030 over ones let me know what you got???
2. Good street Cam better than stock.. Cam, lifters, chain, springs (prefer low miles or new).
3. Stock fuel lines rail to frame
4. Oil cooler lines (new, low mile)
5. Oil adapter above the oil filter where the oil cooler lines bolt too....
6. Good/new oil pump assy
7. Belt tensioner
8. Any Sensors NEW any one many have
9. medal vac lines the one that goes to the pcv
10. Injector harness (new, low mile)
11. A/C lines
12. A/C evaporator core
13. A/C Accumulator/drier
14. A/C Condenser
15. A/C Compressor
16. transmission sifter cable (new, low mile)
17. used aftermarket 200r4 transmission pan

Would like to get mostly everything low mile or new....

Except for the A/C stuff, medal vac lines,trans pan as long as it is in good working order....

Let me know what you got and price thanks....

 

[MJOHNSON]

Hi I have a super clean injector harness.$40.00 shipped in lower 48. (They have 20k on the harness) Let me know if I can help.--Mark

 

[TR Custom Parts]

I have fuel injector rail with harness and both lines that go to the fuel rails(feed & return) off my 35K GN, went to an all custom setup over the winter. For sale on this thread in the parts for sale section...... http://www.turbobuick.com/forums/threads/fuel-system-parts-for-sale.392151/

 

[ALVAROG1983]

I GOT OIL COOLER ADAPTER.

 

[Ttype6]

I have a nice set of .030" J&E pistons floating on bushed,stock rods.

 

[bmsv6]

Sweet I Pm'ed everyone!!!!!....Thanks big help!!!! I will update my post when i start paying/buying the parts I need...... thanks again....

 

[precizion818]

I have a brand new set of standard hyper's pistons
Possibly a good A/C compressor, condensor and drier

 

[ghost rider]

I got a/c compressor, condenser and dier too. I even got the lines too. My 87 gn only had 23,000 miles when i removed them for weight deduction.

 

[tbone87]

I have the fuel lines and oil cooler hoses $65 plus shipping if interested

 

[terrance smith]

86/87 I am doing a budget built right now motor & trans rebuilt and need the following parts low miles or new

1. Pistons STD size in good condition or even .030 over ones let me know what you got???
2. Good street Cam better than stock.. Cam, lifters, chain, springs (prefer low miles or new).
3. Stock fuel lines rail to frame
4. Oil cooler lines (new, low mile)
5. Oil adapter above the oil filter where the oil cooler lines bolt too....
6. Good/new oil pump assy
7. Belt tensioner
8. Any Sensors NEW any one many have
9. medal vac lines the one that goes to the pcv
10. Injector harness (new, low mile)
11. A/C lines
12. A/C evaporator core
13. A/C Accumulator/drier
14. A/C Condenser
15. A/C Compressor
16. transmission sifter cable (new, low mile)
17. used aftermarket 200r4 transmission pan

Would like to get mostly everything low mile or new....

Except for the A/C stuff, medal vac lines,trans pan as long as it is in good working order....

Let me know what you got and price thanks....

 

[terrance smith]

hey how are you i have almost everything your looking for except the trans and fuel or oil lines my name is terrance my #is 207 513-2279 give me a ca;ll if your still looking

 

[49-blues]

I have a new 214/224 cam with new GM lifters-$250. Shipped roll master timing chain-$75., new middle main caps- $150. Shipped, new front cover & new water pump-$200 shipped, used rods in good condition-$50. Shipped, 3 front main caps-$50. Shipped, or $650. For everything shipped. Also have a std/std turbo crank-$275. Shipped ( fresh from machine shop ready to drop in) with crank in total package-$900. Shipped

 

[ttaowner]

WE SPOKE ON THE PHONE YESTERDAY 203 213 9126 JAMES

 

[gobabygo]

I have a set of trw forged pistons on 2 dot rods with arp bolts. I would do 225. Shipped

 

[highboostgn]

I have a shifter cable off my 51k GN. went to aftermarket shifter. 35shipped