Silver Ghost
Member
- Joined
- Apr 17, 2013
What is the bolt torque spec for oil pan to block?
Consider using a cometic for a gasketWhat is the bolt torque spec for oil pan to block?
DdI you apply a thin film of Permatex Ultra Black on both sides of the Cometic Oil Pan Gasket before installing?Consider using a cometic for a gasket
DdI you apply a thin film of Permatex Ultra Black on both sides of the Cometic Oil Pan Gasket before installing?
It is a very hard gasket and not sure how it will compress otherwise
I agree. Haven't had very good luck with the other brands.Consider using a cometic for a gasket
What’s the dental floss for. Do you use it to tie down the gasket?The regular felpro blue gasket with a little sealer on both sides and dental floss to hold it in place works awesome.
They all leak, they all leak, doesn't matter what you do, the hard part is accepting it.
You use the dental floss to tie the gasket to the pan. Once you ge some bolts in loosely you remove the floss and the gasket stays in place with the bolts. bc most of the time the gasket is not proper from packaging .. this is an old man trick usually used outside ,in the back of old laundry mats where they also troll for women of the night who like to floss with it after meeting people like KC87...
damn it man.. that will work ..jerryl likes Luby's .. they still make 50 dollar bills ...gimme dollar
that's a pro tip right thereOnce I switch to The Right Stuff, I never looked back.
0% failure rate so far.