o2s

[SpoolinGN]

Fuel pressure with line off is 41 and line on is 38. o2 volts was 838 with recall on sm2. What is a good range for the o2s to be at to run the best.

Thanks
Scott

 

[Carolinaturbot6]

Those o2 readings sound good right where they're at Scott. The most important thing is preventing knock retard. .82-.88 is sort of a good standard to go by. Sometimes they are a little lower...sometimes a little higher.

As long as you're getting zero knock, you're good to go.

If you do decide to turn up the boost a bit, than only turn it up one lb at a time, & monitor the knock very closely. HTH

 

[SpoolinGN]

today i hit the recall on the scan master and o2s around 835 and 3.3 degrees of timing.

What can i do to but still run about the same boost. Right now its about 18lbs. and knocks sometimes but when its lower i get knock as soon as it hit 13-15.

thanks
scott