S spining 6 got a job Joined May 28, 2001 Jul 12, 2002 #1 just like the subject says, getting 0 counts & 0 % on iac . it's the 2.13 version.
T TurboDave RIP DAVE Staff member TurboBuick.Com Supporter! Joined May 24, 2001 Jul 12, 2002 #2 Sounds pretty badly out of adjustment.
K kenmosher Whoosh! Joined May 24, 2001 Jul 12, 2002 #3 I agree with Dave ... some possible causes: Try the IAC reset/Min Air setting procedure (http://www.gnttype.org/techarea/faq/IACresetscan.html) Look for vacuum leaks allowing air behind the throttle (especially the vacuum lines on the top of the TB and those around the fuel pressure regulator Look for an intake leak
I agree with Dave ... some possible causes: Try the IAC reset/Min Air setting procedure (http://www.gnttype.org/techarea/faq/IACresetscan.html) Look for vacuum leaks allowing air behind the throttle (especially the vacuum lines on the top of the TB and those around the fuel pressure regulator Look for an intake leak
