Just got my new system all hooked up (Alchy Control, New TT Chip set for high boost, New 2800 PTC Converter, New O2 Sensor, New Audible Knock detetector) and I wanted to share some install pics.
I cannot get Methonol locally at this time of year so I had to use denatured alcohol which I bought at Ace Hardware just down the street from me. The first issue was that I could not build boost past 15 psi and with the Gain knob at 6 b/c this was flooding the motor so once I turned the gain down to 2 the car ran smooth when the alchy was flowing. After fixing the boost issue it is now at 23psi on 91 octane and the Gain is at 5 and no knock. My goal is 26 psi and I actually tightened the WG more but I haven't gone out again to test it out.
For the install I didn't like the steel braided lines under the hood, plus they were too short for what I wanted so I found some black 1/4" steel brake line at the autoparts store and routed the steel line along the Up-Pipe and across the intercooler then around the battery and down to the pump. I still use one braided line from the pump to the filter but from the filter to the nozzle it's all hard line.
ks
I cannot get Methonol locally at this time of year so I had to use denatured alcohol which I bought at Ace Hardware just down the street from me. The first issue was that I could not build boost past 15 psi and with the Gain knob at 6 b/c this was flooding the motor so once I turned the gain down to 2 the car ran smooth when the alchy was flowing. After fixing the boost issue it is now at 23psi on 91 octane and the Gain is at 5 and no knock. My goal is 26 psi and I actually tightened the WG more but I haven't gone out again to test it out.
For the install I didn't like the steel braided lines under the hood, plus they were too short for what I wanted so I found some black 1/4" steel brake line at the autoparts store and routed the steel line along the Up-Pipe and across the intercooler then around the battery and down to the pump. I still use one braided line from the pump to the filter but from the filter to the nozzle it's all hard line.
ks