Need Valeo (Ramcharger?) fan only

[hounddogs!]

Need to replace one side of a dual fan setup. Approx 12" diameter, mf'd by Valeo, but I don't know what vehicle was the donor.

The motor shaft that the hub mounts to has two flats on it.

Price plus shipping to 66049. Thanks.

 

[SLOWSIXER]

Which Side One Of Mine Went Out

 

[hounddogs!]

Driver's, but the ones I have look to be interchangeable.
Not sure if the first post was clear--the motor's OK, just need the fan itself.

If you think you have one, I'll do some closer measuring on the broken piece.


Thanks!

 

[turbojimmy]

Check this out:
http://www.turbobuick.com/forums/ge.../224565-ramcharger-fan-motor-replacement.html

Jim

 

[jsta6]

for those of you that have been replacing the motors, how do you get the fan blade off of the motor?

 

[hounddogs!]

There's something like an 8mm nut that holds the fan onto the motor. I can't recall for sure, but it may be a left hand thread.

 

[turbo nasty]

Guys seriously dnt mess with these fans they just dont last

. I have been through 2 sets and even a few motors. They will only last a year or so before teh motors bearings start to die.

Go with spals or teh dual jegs HTH