Here are too more logs. One is mashing the pedal too the floor from a dead stop. The other is easing into WOT from a roll. Since the last log I have added a 3 bar Map sensor and changed the wideband to the correct one, AEM, on my PowerLogger.
Those logs show your SES light is on with a malfunction code 42. That forces your timing to base, which is 10*. You'll need to get that fixed up before moving on.
Thanks. I knew my SES light was on but I did not know that it affected timing or anything. That could be some of my issue. I will start tracing wires and see what I can find.
That log looks pretty normal for a stock car running 14-15psi boost. Spoolup is a tad on the slow side, could be a tight torque converter or leaky wastegate. With the boost that low, I would change the target a/f to something leaner, like 11.5 and see how that goes.
How could I fix the problem of the ECM thinking Im in 3rd and 4th gear? And I'll play around with my tv cable a little this week and see if I can get it shifting a little higher. What is Ideal shift point for stock engine?
Just installed TA49 turbo and adjusted boost too about 17-18 PSI. Car feels a little better than with the stock one but something just doesn't feel right. Heres some logs to review and I may have not been at WOT in some of them the whole time because like I said something just didn't feel right so I would let out. Car feels great just easing into it but if you really mash the pedal it feels like the trans is slipping and just doesn't want to go.
Gotcha that makes since. Thanks Bob. So nothing on these last couple of logs stands out too anyone? The car feels really slow and I just can't figure out what the problem is.