maf translator help

[dognut]

Just got my ebay translator & 3 wire 3 &1/2" maf.The plug that would connect to my existing maf harness is missing.The translator has the following wires purple/brown/pink/blk/yellow/green/blk/pink/white/gray.All ready wired with a plug to the maf is pink +, blk -, yellow F. What 3 wires would go to my maf plug? Also the translator has 4 on/off switches & 4 rotary switches.Can someone give me an idea as to what they should be set at using the 3&1/2" maf.While I am waiting for a 3 1/2 x 3" adapter would the translator work with the stock maf? Thanks, tom

 

[in the elevens]

The dip switches need to be set correctly but that also depends on what chip your using..
Get the chip info and im sure someone here will guide you the right way,if the dip switches are not set correctly the car will run terrible

 

[RIFF RAFF]

Instructions

http://turbotweak.com/translatorinstructions.pdf LINK...

 

[dognut]

thanks for the turbotweak link. Lots of info that I needed I found.Except the wiring colorcode.