MAF connection

[bswanmi]

Hello, I need some information on the connection of a MAFTranslator to my engine harness. The LS1 MAF is wired into a MAFTranslator (6.25) and the wires from the Translator do not have a connector, so all I have are the three bare wires...green, red, and black. the engine harness also has three wires... pink, gray, and black. My question is, which wires connect to which?

 

[notacarlo]

Go find a matching weatherpack for those exposed wires. Don't cut your original wiring to the MAF. You can get the weatherpack at any autoparts store.

Some one can chine in with the correct orientation of colors from the translator.

Or do a google image search of MAF translator and you might get a nice clear shot of the connection.

 

[bswanmi]

Thanks for the advise, so far I have been unable to find a picture with enough detail to determine the wire colors.

 

[notacarlo]

E-mail Mike over at Full Throttle. He will tell you.

 

[pacecarta]

black to black
green to gray
red to pink

i'd cut the wires and tie it in , seal from the weather any way you like and put the stock plug in the glove box , not like youll be needing to plug a stock maf in anytime soon