lq9 swap cam question?

[helrazr]

going to pick up a done lq9 has lots of goodies the cam specs are part number is comp cam 289/293 duration 624/624 lift and a 114 lobe separation. my question is cam I run this cam with a turbo set up

 

[Chuck Leeper]

What's the timing @ .050?

 

[helrazr]

What's the timing @ .050?

239/243 @ .50

 

[Chuck Leeper]

going to pick up a done lq9 has lots of goodies the cam specs are part number is comp cam 289/293 duration 624/624 lift and a 114 lobe separation. my question is cam I run this cam with a turbo set up

That cam has a bunch of "hair" on it.
My Bullet cam for my LQ is 226/225 @ .050, ICL @ 110*, with overlap at 5.5* Lift is .600/.600

Yours is 13* overlap...
What are you going to use this engine for??

 

[helrazr]

That cam has a bunch of "hair" on it.
My Bullet cam for my LQ is 226/225 @ .050, ILC @ 110*, with overlap at 5.5* Lift is .600/.600

Yours is 13* overlap...
What are you going to use this engine for??

Slap a turbo on it. Mostly street and take it to the 1/8 and or 1/4 mile drags once a yr for a few passes

 

[helrazr]

Anyone got any other thoughts thanks!!!

 

[helrazr]

Good thing i found some local guys around to help out thanks guys!!!!!

 

[bison]

If you want a cam that will work properly on a turbo engine message me


Sent from my iPhone using Tapatalk

 

[Full Throttle Steve]

We have a series of LS Camshafts that would work well for your application. Give me a call if you'd like to chat about it.