limitedv6
Stage 11 in the work's
- Joined
- May 5, 2007
I have quite a bit of used parts for sale and will add more as time goes by if you dont see what you are looking for please PM me as I may have it but not listed.
1 1 set of GN wheels in very good shape the black part is a little faded but the chrome is nice $450.00
2 1 oil cooler adapter with the factory lines $75.00
3 1 ATR air filter canister with filter in decent shape $35.00
4 1 stock welded upper plenum ported and polished this has been done very nice $85.00
5 1 Hemco plenum someone started to weld the back up and quit just needs ported back out 120.00
6 2 Stock air canisters complete $35.00
7 1 stock balancer$50.00
8 1 stock intercooler L bracket $40.00
9 1 stock intercooler tubular bracket 35.00
10 3 stock Intercoolers $100.00 ea shipped
11 2 stock turbo shields uncut $60.00
12 1 under drive crank pulley $35.00
13 1 set of stock oil cooler lines $60.00
14 2 stock ECM's $60.00 ea
15 1 complete unported SUPER CLEAN AND NICE and yes complete is complete $350.00
16 1 set of stock heads complete w/rockers $125.00
17 2 set's of nice doors surface rust if any rust at all $200.00
18 1 GN hood will need paint but is a good hood $250.00
19 1 set of ebay headers never ran have been cut on WILL NEED WORK $75.00
20 2 stock throttle bodys $75.00
21 3 stock flywheels $30.00
22 4 set's of valve covers will be blasted/cleaned $60.00 can be powder coated also
23 5 stock starters $25.00
24 1 chrome grille $50.00
25 4 stay down license pate holders $25.00 shipped
26 4 sets of stock headers 1 set good the others need welded $150.00
27 2 stock N/A craks cleaned and ready to go std std $75.00 OBO
28 1 set of 42.5 injectors may have a chip also $125.00
29 1 set of 50# injectors with a chip $150.00
30 I have a set of corillo 6.5 wide journal offcenter rods tat I have ran 3 of them look nice and 3 dont
I did not have any issues with the rods at all and would run them again but they look rough. I will not sell them with out sending pic's and talking to the buyer first.
I have pic's of most of the parts or will get them for you just PM me if intrested or if you are looking for any part's that I dont have listed.
Thanks in advance
1 1 set of GN wheels in very good shape the black part is a little faded but the chrome is nice $450.00
2 1 oil cooler adapter with the factory lines $75.00
3 1 ATR air filter canister with filter in decent shape $35.00
4 1 stock welded upper plenum ported and polished this has been done very nice $85.00
5 1 Hemco plenum someone started to weld the back up and quit just needs ported back out 120.00
6 2 Stock air canisters complete $35.00
7 1 stock balancer$50.00
8 1 stock intercooler L bracket $40.00
9 1 stock intercooler tubular bracket 35.00
10 3 stock Intercoolers $100.00 ea shipped
11 2 stock turbo shields uncut $60.00
12 1 under drive crank pulley $35.00
13 1 set of stock oil cooler lines $60.00
14 2 stock ECM's $60.00 ea
15 1 complete unported SUPER CLEAN AND NICE and yes complete is complete $350.00
16 1 set of stock heads complete w/rockers $125.00
17 2 set's of nice doors surface rust if any rust at all $200.00
18 1 GN hood will need paint but is a good hood $250.00
19 1 set of ebay headers never ran have been cut on WILL NEED WORK $75.00
20 2 stock throttle bodys $75.00
21 3 stock flywheels $30.00
22 4 set's of valve covers will be blasted/cleaned $60.00 can be powder coated also
23 5 stock starters $25.00
24 1 chrome grille $50.00
25 4 stay down license pate holders $25.00 shipped
26 4 sets of stock headers 1 set good the others need welded $150.00
27 2 stock N/A craks cleaned and ready to go std std $75.00 OBO
28 1 set of 42.5 injectors may have a chip also $125.00
29 1 set of 50# injectors with a chip $150.00
30 I have a set of corillo 6.5 wide journal offcenter rods tat I have ran 3 of them look nice and 3 dont
I did not have any issues with the rods at all and would run them again but they look rough. I will not sell them with out sending pic's and talking to the buyer first.
I have pic's of most of the parts or will get them for you just PM me if intrested or if you are looking for any part's that I dont have listed.
Thanks in advance