How Many Grease Fittings?

[Linewalker]

I'm going to do my own oil, filter, and lube change on my car. I know about using ZDDP and a K&N Filter.

How many grease fittings do I look for? I don't want to miss any.

This is a legit question. Please cast no stones because of my ignorance.

 

[matcojoe]

should have eleven, upper and lower ball joints, inner and outer tie rod ends, two on idler arm, and one on the pittman arm if it's like most gm's. and don't forget to check u-joints also.

 

[MY T FAST]

if you have aftermarket rear control arms, you probably have several on those too..if you don't have aftermarket control arms, nevermind