Thanks to this thread http://www.turbobuick.com/forums/turbo-lounge/310208-poll-mod-not-mod.html and a "little" encouragement from my buddy Blackgn1.:biggrin:
Can't believe I'm doing this to a 15k mile hardtop GN but here goes! Gonna start with the basics....fueling, gauges, Scanmaster and tuneup. Then build up from there. Hopefully we're on the right track to a quick,dependable, and well mannered street machine, comments and suggestions welcomed.
Parts gathered so far, mostly from board members and vendors :
160 degree thermostat
Fuel pump Walbro 340 Racetronix
Hot wire kit Racetronix
Adjustable wastegate actuator
Comp 980 springs
Boost,oil,water, fuel pressure gauges
A-pillar and console gauge mounts
R43TS AC plugs
Plug wires
ZDDP
AC Delco fuel filter
Stock intercooler with Duttneck
THDP stainless 3” dp with cutout
Driveshaft loop
AlkyControl single nozzle, 3 bar map
Scanmaster 2.1
Still needed/wanted:
TA-49 (still wrestling with the "stock appearing issue" on this one)
Transmission and TC (uncertain about this direction also)
60lb injectors and TT chip
Adjustable fuel pressure regulator
Bilsteins
Spohn Upper and Lower control arms
HR rear sway bar
Kirban’s wheels
Tires
Interest free loan
Many thanks to those that have already been gracious and patient in giving their advice. (you know who you are)
Can't believe I'm doing this to a 15k mile hardtop GN but here goes! Gonna start with the basics....fueling, gauges, Scanmaster and tuneup. Then build up from there. Hopefully we're on the right track to a quick,dependable, and well mannered street machine, comments and suggestions welcomed.
Parts gathered so far, mostly from board members and vendors :
160 degree thermostat
Fuel pump Walbro 340 Racetronix
Hot wire kit Racetronix
Adjustable wastegate actuator
Comp 980 springs
Boost,oil,water, fuel pressure gauges
A-pillar and console gauge mounts
R43TS AC plugs
Plug wires
ZDDP
AC Delco fuel filter
Stock intercooler with Duttneck
THDP stainless 3” dp with cutout
Driveshaft loop
AlkyControl single nozzle, 3 bar map
Scanmaster 2.1
Still needed/wanted:
TA-49 (still wrestling with the "stock appearing issue" on this one)
Transmission and TC (uncertain about this direction also)
60lb injectors and TT chip
Adjustable fuel pressure regulator
Bilsteins
Spohn Upper and Lower control arms
HR rear sway bar
Kirban’s wheels
Tires
Interest free loan
Many thanks to those that have already been gracious and patient in giving their advice. (you know who you are)