Grand Cherokee steering shaft

[dwall]

I was told its 88-95

Anyone have any idea or know for sure what year/model a direct fit one would be that requires no modification?

They are on Ebay 401jeepguy or a similar handle. Also Quadratec Jeep parts has a listing:

Original Replacement Parts 4713943 - Lower Steering Shaft Assembly for 87-96 Jeep® Cherokee XJ - Quadratec

If we are to believe them its 87-96. A Jeep dealer might confirm? - or maybe your local 4x4 shop?

 

[LSJM1]

The shaft is a direct fit the only grinding is for the top bolt which slightly touches the steering column shaft most peeps tap the bolt in with a hammer and get it started with no grinding I found it easier to slide tha shaft up and mark it where the bolt hits slide it back off and grind-it takes about 30 seconds of grinding with a die grinder then you can put the top bolt in and get it threaded by hand not a big deal either way 84-96 shafts on regular cherokee all work early ones have 7/16 bolts later ones have 1/2 bolts
Grand cherokee most of them have smaller opening for the upper shaft and will not fit without a lot of grinding.This is a cheap mod that you can feel the difference even if the jeep shaft has a small amount of play in the joints or shaft where they slide together

 

[t3intercooled]

SUBSCRIBED