going ls - tired of all the problems that keep coming up on the v-6 build. Here's what I have:
109 bored .030 over, billet caps front to rear and a girdle - 750.00
4340 forged crank - 500.00
4340 h-beam rods with j&e pistons(.030 over) - 450.00
comp roller 212/212 - 150.00
comp 885 roller lifters- 300.00
champion gn1 heads(needs a couple exhaust bolt holes repaired) - 700.00
scorpion 1.65 rockers(sbc style) - 250.00
M&A intake - 750.00
modded ecm with 83# injectors - 350.00 for both
valve covers(unsure of manufacturer but they match m&a intake) - 100.00 - will reduce if you buy intake
factory exhaust headers/crossover100.00
thdp and test pipe with cut-out - 300.00
all accessaries on front of motor - best offers
motor is currently built - but I'll take the sumbitch apart. sick of it.
anything else i've missed (motor wise) just ask
TIA
109 bored .030 over, billet caps front to rear and a girdle - 750.00
4340 forged crank - 500.00
4340 h-beam rods with j&e pistons(.030 over) - 450.00
comp roller 212/212 - 150.00
comp 885 roller lifters- 300.00
champion gn1 heads(needs a couple exhaust bolt holes repaired) - 700.00
scorpion 1.65 rockers(sbc style) - 250.00
M&A intake - 750.00
modded ecm with 83# injectors - 350.00 for both
valve covers(unsure of manufacturer but they match m&a intake) - 100.00 - will reduce if you buy intake
factory exhaust headers/crossover100.00
thdp and test pipe with cut-out - 300.00
all accessaries on front of motor - best offers
motor is currently built - but I'll take the sumbitch apart. sick of it.
anything else i've missed (motor wise) just ask
TIA
Last edited: