After having my car for a year I decided to blow up the motor so I could rebuild it. Well, that’s what I tell myself. This has forced me to learn a whole lot more about these cars. It’s something I should have been doing all along, so this’ll be my expensive lesson! Anyway, I’ve got a partial list going that wouldn’t be possible without the assistance of Turbonut85 on the forum.
Forged steel crank
Forged K1 h beam rods
.030 forged Diamond pistons
Two center billet main caps
Arp main and head studs, cam bolts
Freeze plug
All bearings and gaskets
One thing I need is a recommendation on a cam (I’m assuming it needs to be replaced). I’m running a 6265 journal bearing turbo, 3000 rpm converter, 80 lb injectors on e85, and all the other usual add ons. I was putting out 470 hp before the explosion. Any assistance would be greatly appreciated.
Forged steel crank
Forged K1 h beam rods
.030 forged Diamond pistons
Two center billet main caps
Arp main and head studs, cam bolts
Freeze plug
All bearings and gaskets
One thing I need is a recommendation on a cam (I’m assuming it needs to be replaced). I’m running a 6265 journal bearing turbo, 3000 rpm converter, 80 lb injectors on e85, and all the other usual add ons. I was putting out 470 hp before the explosion. Any assistance would be greatly appreciated.