GNVYUS 1
Well-Known Member
- Joined
- Dec 15, 2002
Ok, I had the Egr tower milled and welded shut, put the aluminum engraved block off plate on just for looks and after thinking I had a bad plenum leak I realized the fluid was blowing up and not down the plenum when I would spray it. Then I felt the back of the egr blockoff and bigger than $hit, it's totally blowing up at the plenum.
What the heck, are there other ports that bleed into the towers port that go to the Egr?? I was under the impression that the tower was the only thing that was feeding the Egr.
And the block off plate killed the gasket up top so I had to Permatex it this time around, that lower bolt doesn't really keep it flat.
What the heck, are there other ports that bleed into the towers port that go to the Egr?? I was under the impression that the tower was the only thing that was feeding the Egr.
And the block off plate killed the gasket up top so I had to Permatex it this time around, that lower bolt doesn't really keep it flat.