tim87tr
Obsession or Digression?
- Joined
- Sep 19, 2001
It has a Weber 206 roller cam and Dave Weber ported and O-ringed irons, std bore and crankshaft, TRW pistons with light weight pins, and steel main caps.
Last year at Morocco, IN, I drove the car with this roller cam engine 100 miles to the event, and it ran 11.01 @ 121.9 mph right off the street on MT DRs, pump gas, methanol inj, TA 62 at 24 psi, TT street chip, and through the mufflers. It pulls well on the top end gaining 26.4 mph in the quarter on that small shaft turbo.
I sold the car as a roller earlier this year. I put about 1500 miles and 25 passes on the car/engine, half of them eighth mile, and the engine had about 2000 miles and 50 passes from the previous owner.
It is complete from intake to oil pan, and has 55 lb injectors. I have a modified ECM for those injectors that I could include also. PM me for cell number if you have any questions. $5500
Last year at Morocco, IN, I drove the car with this roller cam engine 100 miles to the event, and it ran 11.01 @ 121.9 mph right off the street on MT DRs, pump gas, methanol inj, TA 62 at 24 psi, TT street chip, and through the mufflers. It pulls well on the top end gaining 26.4 mph in the quarter on that small shaft turbo.
I sold the car as a roller earlier this year. I put about 1500 miles and 25 passes on the car/engine, half of them eighth mile, and the engine had about 2000 miles and 50 passes from the previous owner.
It is complete from intake to oil pan, and has 55 lb injectors. I have a modified ECM for those injectors that I could include also. PM me for cell number if you have any questions. $5500