I never liked the nylon buttons/retainers on the stock rocker arms. They are ok, but...
So I proceeded with the below modifications. Done on a spare arm from my 1977 engine. Tap 5/16 threads for a hollow hex bolt.
Thoughts?
The shim is offcentered because I lacked some patience for this proof of concept
Posted from the TurboBuick.Com mobile app
So I proceeded with the below modifications. Done on a spare arm from my 1977 engine. Tap 5/16 threads for a hollow hex bolt.
Thoughts?
The shim is offcentered because I lacked some patience for this proof of concept
Posted from the TurboBuick.Com mobile app