Prices do not include shipping:
87 water pump pulley 10.00
87 Crank Pulley 10.00, I have 2 of the,
87 Fuel rail with 42lbs injectors 100.00
87 Intercooler Bracket 10.00ea, I have 2 of these
87 Upper dog house 15.00
87 Belt Tension 55.00
87 Turbo Shield, has been cut for aftermarket down pipes, , 20.00ea
87 Stock rods 5.00 each, I have 5 of them, they will need to be recon'd
87 Stock rods balanced and mag'd and shot peened, deburred, with .030 pistons, dyno time only, less than 30mins on them. 100.00obo
87 Comp Cams 1pc push rods 8.650length, .080 wall thickness, 40.00
Cam bearings for 87 gn block manufacture TA part# TA1557A NEW in the box, 2 boxes, 20.00ea
87 Stock exhaust manifolds, cracked in the normal spots, will have to be welded. 40.00
87 Timing Chain cover, 10.00ea.
87 Hall effect sensor , status unknown, 10.00
ARP MAIN STUDS for Turbo V6, used.30min run time, 25.00
87 Pair of stock valve covers 15.00
87 LH/RH blinkers 1 out of 10 they would be a 4. 10.00 for the pair
86 GN Grill 1 out of 10 it would be a 4, 20.00
OTC Monitor 2000 Scan Tool for 86-87 Buick , works great. 40.00
87 water pump pulley 10.00
87 Fuel rail with 42lbs injectors 100.00
87 Intercooler Bracket 10.00ea, I have 2 of these
87 Upper dog house 15.00
87 Turbo Shield, has been cut for aftermarket down pipes, , 20.00ea
87 Stock rods 5.00 each, I have 5 of them, they will need to be recon'd
87 Stock rods balanced and mag'd and shot peened, deburred, with .030 pistons, dyno time only, less than 30mins on them. 100.00obo
87 Comp Cams 1pc push rods 8.650length, .080 wall thickness, 40.00
Cam bearings for 87 gn block manufacture TA part# TA1557A NEW in the box, 2 boxes, 20.00ea
87 Stock exhaust manifolds, cracked in the normal spots, will have to be welded. 40.00
87 Timing Chain cover, 10.00ea.
87 Hall effect sensor , status unknown, 10.00
ARP MAIN STUDS for Turbo V6, used.30min run time, 25.00
87 LH/RH blinkers 1 out of 10 they would be a 4. 10.00 for the pair
OTC Monitor 2000 Scan Tool for 86-87 Buick , works great. 40.00
