Aluminum, Stainless and Mild Steel Bends

[wheelie]

I have Aluminum, Mild Steel, and Stainless bends in 1.5" to 4.0" sizes, both 45s and 90s, and straight tubing. All .065" wall thickness. If anyone needs anything, give me a PM, email or call 636-326-9534 , will cut a good deal, gotta move this stuff!! Thanks, Dan

 

[JRGN]

I have Aluminum, Mild Steel, and Stainless bends in 1.5" to 4.0" sizes, both 45s and 90s, and straight tubing. All .065" wall thickness. If anyone needs anything, give me a PM, email or call 636-326-9534 , will cut a good deal, gotta move this stuff!! Thanks, Dan

Dan Looking for something in stainless, short radius and a 4" take out what I seem to find is a 6" takeout. Jr

 

[gergwheel]

let me know what i could get some 3.5" SS for. Prefer 180* bends but 90*'s would also work.

 

[Otto J]

I made need some 4 inch aluminum intercooler piping,Couple of elbows and some straights
what do ya got?and how much

 

[Chris McDade]

I need a 2.5" aluminum 90 degree. How much shipped to 77469?

Thanks,

 

[GNJoe86]

U only have bends or strait pieces also???

 

[BlackMetal]

I'm interested in buying what I need to make my 4in system. You say that you offer straight tubing as well but there aren't any prices for that on your site, so let me know. I'll probably need two or three 45* bends and some straight tubing.

 

[wheelie]

Sorry didnt check the board in a while, I have bends and straights.

2.5" Alum 90s are $24
3.0" Alum 90s are $25
3.5" Alum 90s are $31
4.0" Alum 90s are $25

Have straights and bends in Mild Steel and Stainless as well. PM or email me dan@hyperformanceracing.com Thanks for your patience! :biggrin:

 

[XxDarkSidexX]

how about some mild steel

2 1/4"..... 2 90's, 4 45's, and 10ft of straight pipe

2 1/2".....3 45's, 2 90's, and 3ft of straight pipe

thank you Darkside