Alky control new kit issues

[8kllr]

Just finished install,did all the tests.tpok car out for a drive wants to die no power ran it up and down street a few times no change.put in garage idle just fine
Any ideas
Could it be map sensor and can I put old 2 bar back in and try it

 

[Chuck Leeper]

Original MAP was there to run the dash boost gauge only.
U have a stock ecm?

 

[8kllr]

Yes stock ecm
With tt chip for alky

 

[Chuck Leeper]

Check the seating of the new chip.

 

[8kllr]

I got it the damn hose into the throttle body popped off went over car for 2 hours and missed it called alkycontrol talking to them and looking at front of car I finally see it.i feel like a dumbass
Turbo maxes with 20# and gain on alky on 3 car runs well now next weekend LS1 maf and translator
And mbc

 

[TurboTnZ06]

Stock turbo loves 24 psi on meth. It is like a whole nother car at that level.

 

[8kllr]

I can't get over 20 lbs.
With alky control on 8
I do have a bad drivers header leak which just bought a pair that's been repaired hopefully when I put this on it will fix my issue sometimes I can run it a 6.5 rough and no knock the sometimes I have to put it to 8
I don't know

 

[Chuck Leeper]

I do have a bad drivers header leak which just bought a pair that's been repaired hopefully when I put this on it will fix my issue

The exh leak is a MAJOR player in this situation.
A suggestion: Quit trying to commit "crankshaft suicide" and fix the exh system, log some useful data, and stay out of hi boost.

 

[8kllr]

Hopefully this weekend I can get the new manifold on