98-02 S-10 Calipers question

[nickygn23]

Quick question . I was planning on using 98-02 S-10 Blazer Calipers on my National. I know that there is no clearance issues with our stock rims but do I need to buy new spindle's or can these calipers bolt up to our existing spindles?
Thanks

 

[nickygn23]

Wow. surprising, I thought I would get some responses

 

[malibudave]

Yes. You will need the spindle, hub, rotor, and caliper assembly.

 

[nickygn23]

Thanks Dave. Kinda figured but still wasn't sure. Thanks

 

[Shawn N]

Leave the abs sensors in place on the hub to keep crud out of there. The hubs will only last 50,000 miles or so before the bearings fail. I went through 3 sets of each on my 99 Jimmy for the 200k I put on the clock. Good luck!

 

[nickygn23]

Thanks for that tip Shawn. Thanks good advise. I wonder if any companies makes a kit new for this.?

 

[Team Canada]

For more information on this swap, there is a lengthy thread on GBody.com
https://gbodyforum.com/threads/98-05-blazer-brake-upgrade-done.35747/#.U2BZ91esBc5

 

[nickygn23]

Wow..... That will do it. Thanks Team

 

[Rugby]

I just bought it all out of the junk yard for $150.

 

[nickygn23]

That's a great deal. I'm already calling salvage yards.. Thanks for the tip.

 

[nickygn23]

Score!!!!!
I love Craigslist