I'm into LSx stuff now so it is time for my GN stuff to go. (all parts are used and for '86-87 unless specified)
1984-85 style crank sensor (no mounting bracket) $15
1984-85 style transmission dipstick/tube (red handle) $20
These parts below are all '86-87 style!
Engine parts:
*new* TA performance Adj Oil Pressure Reg pn TA 1502 $20 shipped
Bosch FPR 237 $20
Bosch FPR 233 $20
Bosch FPR 233 with billet adj top $30
(6) Red Top injectors p/n 280150756 (1 pintel cap broken, a few 0rings missing) $50 Cody Motorsports will rebuild/clean/flow them for $80!
(6) Stock GN injectors $30 Cody Motorsports will rebuild/clean/flow for $80
ported stock GN upper doghouse (intake) 62mm with EGR tower removed $30
TB cable bracket holder $25
stock GN turbo cast iron downpipe elbow/puck/gasket/stock downpipe 2" stub $30
stock intercooler uppipe (painted black) with HKS blowoff valve welded on $40
(2) alum accessory brackets $40 each
powersteering pump/pulley with high pressure line $30
*new* GN charcoil canister $20
*new* ARP complete exterior engine bolt kit for a "show look" (valve cover/front cover/intake/etc. 55 bolts stainless and 6-8 black oxide style total (they all are individually bagged in groups and have p/n written on them; however I don't have a list of where they go.... that is why they are soo cheap) $80
crank pulley with stock crank spacer $20 (painted red)
Turbonetics DeltaGate Mark II pn 10101 (needs new diaphragm) $25
(4) '84-85 style valvecovers (ribbed) with no holes (meaning no provision for filler neck or breather of any kind) $5 each (need painting)
(2) '86-87 style valvecovers (ribber) with fill neck hole $5 each (need painting)
stock bare throttlebody (no sensors; however has blade/shaft) $20
(3) stock fuel rails $25 each
(1) GM front engine cover (no wear in cam bearing/retainer area at all) $60 (essentially brand new)
(2) used front engine covers minimal cam bearing/retainer area wear $25 each
Engine Electronics/wiring:
*new* Wells TPS sensor $30
*new* Caspers Electronics 14 guage injector harness $80
Caspers Electronics 02 simulator (remove stock O2 sensor when running leaded fuel) $10
crank sensor with bracket $20
(2) ESSC sensor (pn HKP 881654) black square shaped w/ 5 blade prongs $30/each
(26) misc chips: ATR, Kenne Bell, Delco, Red Armstrong, Jay Carter $100 for all (will not separate)
Transmission and rear end parts:
TH200-4R oil pan with drain plug welded in (on very bottom) $20
B&M Megashifter for TH200-4R with 3' cable $60
Art Carr (the real one) TH350 8" 4500 stall convertor (Art Carr retail $1200.... and freshly rebuilt & restalled with receipt zero miles) $800
12 bolt chrome Trans-Dapt rear diff cover pn 9584 (fits '65-70 Intermediates and 70-71 Camaro and Chevelle 12 bolt rear with filler plug $15
10 bolt Mr. Gasket ring gear spacer with bolts pn 908A $10
Body:
Passenger side (RH) turn blinker (orange rear/clear front curved) pn 65023521 $10
Driver side front GM bumper filler $20 (needs paint but in good condition)
black GN antennae with motor/harness/plug complete $20 SOLD
*new* mint condition in original packaging Bowling Green Customs '84-87 Regal/GN protective bra $60
aluminum front bumper reinforcement (the 5+ foot long piece) $70
Shipping extra unless specified.
gnx7@hotmail.com for pics if you need them. Please state which pics you want!
Thanks,
-Mark
1984-85 style crank sensor (no mounting bracket) $15
1984-85 style transmission dipstick/tube (red handle) $20
These parts below are all '86-87 style!
Engine parts:
*new* TA performance Adj Oil Pressure Reg pn TA 1502 $20 shipped
Bosch FPR 237 $20
Bosch FPR 233 $20
Bosch FPR 233 with billet adj top $30
(6) Red Top injectors p/n 280150756 (1 pintel cap broken, a few 0rings missing) $50 Cody Motorsports will rebuild/clean/flow them for $80!
(6) Stock GN injectors $30 Cody Motorsports will rebuild/clean/flow for $80
ported stock GN upper doghouse (intake) 62mm with EGR tower removed $30
TB cable bracket holder $25
stock GN turbo cast iron downpipe elbow/puck/gasket/stock downpipe 2" stub $30
stock intercooler uppipe (painted black) with HKS blowoff valve welded on $40
(2) alum accessory brackets $40 each
powersteering pump/pulley with high pressure line $30
*new* GN charcoil canister $20
*new* ARP complete exterior engine bolt kit for a "show look" (valve cover/front cover/intake/etc. 55 bolts stainless and 6-8 black oxide style total (they all are individually bagged in groups and have p/n written on them; however I don't have a list of where they go.... that is why they are soo cheap) $80
crank pulley with stock crank spacer $20 (painted red)
Turbonetics DeltaGate Mark II pn 10101 (needs new diaphragm) $25
(4) '84-85 style valvecovers (ribbed) with no holes (meaning no provision for filler neck or breather of any kind) $5 each (need painting)
(2) '86-87 style valvecovers (ribber) with fill neck hole $5 each (need painting)
stock bare throttlebody (no sensors; however has blade/shaft) $20
(3) stock fuel rails $25 each
(1) GM front engine cover (no wear in cam bearing/retainer area at all) $60 (essentially brand new)
(2) used front engine covers minimal cam bearing/retainer area wear $25 each
Engine Electronics/wiring:
*new* Wells TPS sensor $30
*new* Caspers Electronics 14 guage injector harness $80
Caspers Electronics 02 simulator (remove stock O2 sensor when running leaded fuel) $10
crank sensor with bracket $20
(2) ESSC sensor (pn HKP 881654) black square shaped w/ 5 blade prongs $30/each
(26) misc chips: ATR, Kenne Bell, Delco, Red Armstrong, Jay Carter $100 for all (will not separate)
Transmission and rear end parts:
TH200-4R oil pan with drain plug welded in (on very bottom) $20
B&M Megashifter for TH200-4R with 3' cable $60
Art Carr (the real one) TH350 8" 4500 stall convertor (Art Carr retail $1200.... and freshly rebuilt & restalled with receipt zero miles) $800
12 bolt chrome Trans-Dapt rear diff cover pn 9584 (fits '65-70 Intermediates and 70-71 Camaro and Chevelle 12 bolt rear with filler plug $15
10 bolt Mr. Gasket ring gear spacer with bolts pn 908A $10
Body:
Passenger side (RH) turn blinker (orange rear/clear front curved) pn 65023521 $10
Driver side front GM bumper filler $20 (needs paint but in good condition)
black GN antennae with motor/harness/plug complete $20 SOLD
*new* mint condition in original packaging Bowling Green Customs '84-87 Regal/GN protective bra $60
aluminum front bumper reinforcement (the 5+ foot long piece) $70
Shipping extra unless specified.
gnx7@hotmail.com for pics if you need them. Please state which pics you want!
Thanks,
-Mark