Search results

My O2 voltage at WOT starts off at 980's and starts working its way down. At the end of the quarter they are around 800. I'm using WINALDL. My OTC shows they are in the high 890 and end up around 800. I'm not sure which to believe. I'm at 16 lbs boost and line off is 46. 93 octane...

What all should be ask or discussed when purchasing a new chip? I have a PTE 93 chip. It's great but I've been wondering if other chips would out perform it. I don't know. I read the "secrets" listed on gnttype.org and there is a ton of stuff that is programmed in to these chips. Way more...

I have a ticking sound when it's warmed up. It's not a header. What is in the trans that can make this sound? I only hear it when I turn or when I put it in Park after I've been driving around. The trans use to shift hard and firm but it getting progressively weaker over the last several...

Has anyone tried the WINADL scan tool? If you are not familiar with it, it's a free software download that requires about 10 dollars worth of parts from you local electronic store. Here is the link. http://www.winaldl.webhop.net/ If you don't want to build the cable, you can purchase one...

Have a T-Link for sale? If so, I'm interested. email me at vorsicle@yahoo.com

Is anyone using Racetronix Delphi 50# injectors? If so, are you happy with them? I am getting ready to purchase a set of 50's and I was price shopping. Racetronix beats everyone in price. I was advised that they might be 52# or 55#. I want to make sure so I'll know when the chip is burned...

I need to buy either Direct Scan or Turbo Link. I am aware of the pro/cons for both. Direct Scan is going for $250 and T-Link (basic) is $299 Does anyone know where you can get T-Link for less? Right now I am leaning towards DS because of the price difference. I don't mind making...

I want to install a kill switch in my Buick but I really don't like the versions listed in gnttype.org. I.E. the reed switch and the poor mans pass key. I would just like to install a toggle somewhere. Does anyone have a way of doing this? Where does the switch tie in to? Fuel, ECM, etc...

I'm currently using the stock maf and pipe. I want to go to the 3.5 LS1 MAF. How much do these go for and what else do I need to purchase?

My stock tach doesn't work, however, my stock boost does. I would like for the tach to work even if it's off a little. I don't mind sending it off to Caspers. Does anyone have any suggestions as to how I can get it to work?

Thanks everyone! I have been looking for a FMIC for some time now. I was thinking of getting a CAS. I have heard "some" bad stories but all vendors has that issue. Until today, and after reading this thread, I will never purchase from CAS. So, he has lost my business too. Hopefully, more...

Ask me before you purchase this... Talk to me before you purchase this vehicle. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6137&item=2427999535 I will offer you my opinion. I have looked and test drove this vehicle first hand.

Racetronix.com has their Delphi 50# for $328.50. That includes shipping. Has anyone seen a better deal? If so, where?

Correct me if I am wrong. I've seen more MSD 50# injectors out there than any other brand. Racetronix has some Delphi 50# flow tested for $315. The cheapest I've seen MSD's are $399.00 and up. Are the Delphi's any good?

Check out this car for sale on Ebay. The owner states he has never lost a race except for one against a Jaguar. See link. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3141042182

What's the "sweet spot" for a PT52?

For those of you that have a scan tool, which one do you suggest and if you had to do it all over again, which one would you choose? I know about the frames per sec issue of each and how each hooks up.

I've been searching for a steering column guard and have been unsuccessful. Does anyone know where to get these? I'm looking for the kind that stays on and never has to be removed. Not the bright orange or red kind that you put on like a club after you park. Thanks

I am about to replace my turn signal lever. Can anyone advise what all is involved? Thanks

Does anyone know what CFM the stock fan puts out?