Everything can be delivered to Richard Clark's place. Email for pictures of anything not pictured. Open to all offers.
I have a Kauffman Car Hauler. 16' Dual 3500 lb Axles, Trailer brakes on 1 axle, New tires with less than 1000 Miles on them, new bearings and seals and includes a new spare tire & a winch.. $1000
Fiberglass Hood. The one Cal sells that uses stock mounting hardware. Never used. Blocked and ready for paint. $500
Delphi 83# Injectors, Siemans 95# injectors. $250 each shipped.
Kings Cranks Billet Crank for 109 Block. 3.54 stroke. Setup for 6" SBC rods. $1500
5 Boxes + 3 plugs (23 Plugs total) Autolite AR3932 $50 shipped for all of them.
2 TH-400 Filter/gasket kits $40 shipped for both.
4 pairs of felpro 1200s $60 shipped for all 4
Console Gauge pod. Needs a coat of paint. $25 shipped
Dual Apilar Gauge holder with 2 lights. Could also use a shot of paint. $25 shipped
3" SS downpipe for external gate. You will need to weld your headers to match for the gate. $225 shipped.
MSD Distributer Cap and Rotor *Brand New* $50 shipped
Capser's Injector Wiring Harness in very good shape. $50 shipped
Wix 51036 Oil Filter $20 bucks shipped for both plus a Fram filter.
Oil Filter relocation kit. Needs a new fitting on the turbo feed line. $50 shipped.
2 used 200R4 detent cables. $20 bucks shipped.
drive shaft loop. $40 shipped.
Brand New heavy duty Drive shaft loop for 4"+ $40 shipped.
109 Block .030 over and probably needs cleaned up. $250
I have a Kauffman Car Hauler. 16' Dual 3500 lb Axles, Trailer brakes on 1 axle, New tires with less than 1000 Miles on them, new bearings and seals and includes a new spare tire & a winch.. $1000
Fiberglass Hood. The one Cal sells that uses stock mounting hardware. Never used. Blocked and ready for paint. $500
Delphi 83# Injectors, Siemans 95# injectors. $250 each shipped.
Kings Cranks Billet Crank for 109 Block. 3.54 stroke. Setup for 6" SBC rods. $1500
5 Boxes + 3 plugs (23 Plugs total) Autolite AR3932 $50 shipped for all of them.
2 TH-400 Filter/gasket kits $40 shipped for both.
4 pairs of felpro 1200s $60 shipped for all 4
Console Gauge pod. Needs a coat of paint. $25 shipped
Dual Apilar Gauge holder with 2 lights. Could also use a shot of paint. $25 shipped
3" SS downpipe for external gate. You will need to weld your headers to match for the gate. $225 shipped.
MSD Distributer Cap and Rotor *Brand New* $50 shipped
Capser's Injector Wiring Harness in very good shape. $50 shipped
Wix 51036 Oil Filter $20 bucks shipped for both plus a Fram filter.
Oil Filter relocation kit. Needs a new fitting on the turbo feed line. $50 shipped.
2 used 200R4 detent cables. $20 bucks shipped.
drive shaft loop. $40 shipped.
Brand New heavy duty Drive shaft loop for 4"+ $40 shipped.
109 Block .030 over and probably needs cleaned up. $250
Attachments
-
20180428_115534.jpg953.3 KB · Views: 85
-
20180428_115616.jpg952.7 KB · Views: 88
-
20180428_115753.jpg1.7 MB · Views: 82
-
20180428_115804.jpg848 KB · Views: 95
-
20180428_120112_resized.jpg1,016.7 KB · Views: 94
-
20180428_120429_resized.jpg843.4 KB · Views: 91
-
20180428_120504_resized.jpg960.9 KB · Views: 83
-
20180428_120620_resized.jpg1.1 MB · Views: 82
-
20180428_120639_resized.jpg1 MB · Views: 79
-
20180428_120707_resized.jpg662.4 KB · Views: 77
Last edited: