Who sell the Morel made hyd roller lifters set? Any idea what they cost? Thanksthe comp 853-12 will work and Morel makes a set. I like the Morel a bit better due to the foot design. The Comp 885 is no longer available
Any idea what he is asking for them?A friend has a set of Morels if interested.
Posted from the TurboBuick.Com mobile app
Nick, in your opinion is the 885 better than the 853 roller lifter set?I have access to a few sets of Comp 885 roller lifters if you want a set.
A set just went into one of the production 4.1 builds just being finished. There are 5 additional builds in process, but may have an extra set available?
What are you asking for the Comp Com 885-12 roller lifters?I have access to a few sets of Comp 885 roller lifters if you want a set.
A set just went into one of the production 4.1 builds just being finished. There are 5 additional builds in process, but may have an extra set available?
Mike, are the comp 853-12 drop in ready? Any lifter bore alteration needed?the comp 853-12 will work and Morel makes a set. I like the Morel a bit better due to the foot design. The Comp 885 is no longer available
Plans are to install Comp Cams CCA-69-200-8 hyd roller.I had a couple sets of the old 853's if your heart is set on them I will check and see if I still do. As Bison said the new ones require some work The Morel is a drop in, what is your goal? That will help determine what cam and how aggressive it needs to be and what sort of lifter you may need.
Mike
853 will not work unless it's old 853's. New ones are a no go unless the bores are bushed.
forzfed said:Would you happen to know the measurements on the old one compared to the new one? I'm going to change out a lifter and I'm thinking I might have a new one. Or is there a different part number for old and new, besides 853?