Clean out sale (NOS,performance,Gauges,etc)

[pitch black]

Hemco Plenum $175
Console gauge Pod( nos) $20
2 gauge apillar pod (nos) $25
1 gauge apillar pod (nos) $20
8 position Max effort for 36lb inj $150
15 position switch $40
Casper Volt booster (used) $40
NOS dash speaker set $45
Maf translator 6.2(nos) w/ (used)LS1 maf $230
Maf translator 4.0 w/6.22upgrade (nos) $165
3.5" delphi 5pin maf Used $90
CCCI deadend for XFI distributor conversion $75
Casper Heated O2 (nos) $40
Casper field fix alternator harness (nos) $35
Casper mat 12" extender (nos) $16
Casper Injector harness (nos) $85
X2 Casper fuel pump intank connector (nos) $15each
Casper vplus volt booster (nos) $60
Casper Mat install kit for 84/85 to use 86/87 computer (nos) $25
NOS turbo oil drain back tube $85
Casper billet vacuum block (nos) $35
FFP audible/visual knock detector (nos) $55
200 4R detent $20
Kenne Bell console switch plate $30
Suntech 2 5/8" vacuum/boost gauge $15
Autometer 3 1/4" Tach $25
Equus 2 1/8" elec oil press gauge $20
Autometer oil press and water temp 2 5/8" mech gauges w/ tubing kit and mount panel (nos) $100
Custom oil pickup $40
Fuel rail t's used to tee off front of stock fuel rail $10each have 5
Egt meter kit $100
Egt prob set 1 $25
Egt prob set 2 $15
NG3 fuel boost pump/theft deterrent $45
Wheel well mldg set used could use new paint $100




All the parts mark NOS are new never used, All prices are PLUS SHIPPING.
Sorry NO PAYPAL Will have more parts to list as I clean out the house.

 

[daves87gn]

Console gauge Pod( nos) $20
Maf translator 4.0 w/6.22upgrade (nos) $165
Casper field fix alternator harness (nos) $35
Casper fuel pump intank connector (nos) $15each
Autometer oil press and water temp 2 5/8" mech gauges w/ tubing kit and mount panel (nos) $100

I will take all the above, PM me you address so i can sen out MO
thanks

Egt prob set 1 $25
Egt prob set 2 $15

interested in the above pending pics and a little more info
also saw a set a pistons and rods are they for sale?

thanks
Dave

 

[87Limited2Turbo]

Maf translator 6.2(nos)

interested in Maf translator 6.2(nos) w/ (used)LS1 maf $230
but have question first....pm sent

 

[vik1986]

caspers-vacum block/mat 12:extender/volt booster/alternator harness

interested in caspers items,send payment info or call me vik 708 953 1908. thanx.

 

[scot w.]

Send me a pic of the Kenne Bell console switch plate $30 to sgblhb@charter.net and put me in line...

SW.

 

[pitch black]

Have to go help someone at the track this morning but will get back to everyone this afternoon. Sorry for the delay.

 

[earcher1]

wheel well moulding,fuel line t

if the wheel well mouldings are original black ones and in good condition(needs repaint is fine,just not dented up)i'll take them.also ,i'll take one of the fuel line tee's.send me your address and i'll send a check.thanks

 

[G-Force]

Casper billet vacuum block (nos) $35

I will take this for $35 Shipped.

 

[regal81455]

2nd on the switchplate pending pics...

 

[Squid4life]

Interested in KB switch plate and EGT probes, pending pics. Throw me in line.

 

[pitch black]

Here are some requested pics will get better ones if needed

 

[Squid4life]

I will take the EGT probe on the left, if it makes it down to me. Nice parts, good luck with the sale!

 

[pitch black]

SOLD Pending payment:
Console gauge Pod
Maf translators, both are sold
Casper field fix alternator harness
Casper fuel pump intank connector both sold
Autometer oil/water gauge set
Egt prob Set #1
Knock detector
used volt booster



There are a few other things I am awaiting answers on and will post when I know. Also still a few more boxes to go through and will post up anything else I find I no longer need.

 

[pitch black]

A few requested pics

 

[scot w.]

Switch plate looks good, I will take it! Where do I send payment?


Scot W.

 

[VADER]

is the 2 gauge pod the full pillar? if so, i'll take it, and this too if available.
Casper mat 12" extender (nos) $16

 

[1KWIKSIX]

Hemco Plenum

I'll take the Hemco Plenum.

Shipping to Aston , PA 19014

Sent you another PM

thx

dp

 

[pitch black]

Sold:
Vacuum block
Mat extender harness
Volt booster (nos)
Kenne bell switch plate



Also to clear up some questions the 2 gauge A pillar pod is not the full pillar type.
As before I still need to go through a few boxes of stuff. Will post new thread with anything else I find over the next few days

 

[GNXDad]

are the wheel mouldings painted chrome or original blackout trim

 

[pitch black]

Hemco Plenum $175 SOLD
Console gauge Pod( nos) $20 SOLD
2 gauge apillar pod (nos) $25
1 gauge apillar pod (nos) $20
8 position Max effort for 36lb inj $150
15 position switch $40
Casper Volt booster (used) $40 SOLD
NOS dash speaker set $45 SOLD
Maf translator 6.2(nos) w/ (used)LS1 maf $230 SOLD
Maf translator 4.0 w/6.22upgrade (nos) $165 SOLD
3.5" delphi 5pin maf Used $90
CCCI deadend for XFI distributor conversion $75
Casper Heated O2 (nos) $40
Casper field fix alternator harness (nos) $35 SOLD
Casper mat 12" extender (nos) $16 SOLD
Casper Injector harness (nos) $85 SOLD
X2 Casper fuel pump intank connector (nos) $15each SOLD
Casper vplus volt booster (nos) $60 SOLD
Casper Mat install kit for 84/85 to use 86/87 computer (nos) $25
NOS turbo oil drain back tube $85
Casper billet vacuum block (nos) $35 SOLD
FFP audible/visual knock detector (nos) $55 SOLD
200 4R detent $20
Kenne Bell console switch plate $30 SOLD
Suntech 2 5/8" vacuum/boost gauge $15
Autometer 3 1/4" Tach $25
Equus 2 1/8" elec oil press gauge $20
Autometer oil press and water temp 2 5/8" mech gauges w/ tubing kit and mount panel (nos) $100 SOLD
Custom oil pickup $40
Fuel rail t's used to tee off front of stock fuel rail $10each have 5
Egt meter kit $100
Egt prob set 1 $25 SOLD
Egt prob set 2 $15
NG3 fuel boost pump/theft deterrent $45
Wheel well mldg set used could use new paint $100 SOLD







All the parts mark NOS are new never used, All prices are PLUS SHIPPING.
Sorry NO PAYPAL Will have more parts to list as I clean out the house.

Update on what's sold. I have had a few question on the rods. I need to find the last rod before I can list them for sale.