I went to walbro site and contact them directly, I already sent my pump and just waiting IF they will replace it, thanksAloha guys, I am unfortunately in the same boat. I recently bought a NIB Walbro pump, installed it and after driving the car twice, it won't hold pressure. I bought it from another member, is there a course of action I should be taking? Thank you all.
Aloha guys, I am unfortunately in the same boat. I recently bought a NIB Walbro pump, installed it and after driving the car twice, it won't hold pressure. I bought it from another member, is there a course of action I should be taking? Thank you all.
Sir, sorry, I haven't been able to drop the fuel tank as of yet. I'm assuming that it's stamped on the pump? Thanks for the reply. I've e-mailed Walbro directly, still waiting to see if they will respond.
Robbie.
Robbie, unfortunately neither Mike nor Walbro can give you a meaningful response without you first providing them more information (date--like Mike asked for) , or send the pump to them...
Unfortunately #2, you have to 1st remove the pump to do either...and finally, #3--you'll be out-of-business/ running while this is being resolved--unless, of course, you purchase/install another pump in the mean-time...
Well Another F20000169 bites the Dust, few weeks ago I noticed PRECIPITISLY
Low O2's...and the Pump also making some weird noises...I Bought this pump in 7/08 from Cotton's to Replace Another Bad Walpro..So I bought Another New Walpro from FT.... Of course now my o2's are Up there again where they were, and my pressure shoots Right to 68-70....So thats THREE (on the Third Now) Walpro pumps since 2007....
man i hope that not the case cause i purchased one at the beginning of the yearI have about 600 miles on it
Denso Supra is quiet & I had to reduce static (line off) pressure.
Thinking mine just bit the dust,fewer than 600 miles on the pump!