turbobitt
Well-Known Member
- Joined
- Feb 14, 2002
Building this custom 60-2 (58X) trigger wheel to fit on the face of my drive mandrel. The intent if this project is to improve the low RPM timing accuracy and cranking/start-up response of the FAST XIM CNP.
The intent of the front bracket is to stabilize the actual sensor part of the bracket as well as provide a means to set the wheel and cam sync by utilizing the balancing hole on the trigger wheel to align with strategic hole placement on the front bracket.
So far I have the hardware made and will be getting the details coated with anodize and Cad plate.
Allan G.
The intent of the front bracket is to stabilize the actual sensor part of the bracket as well as provide a means to set the wheel and cam sync by utilizing the balancing hole on the trigger wheel to align with strategic hole placement on the front bracket.
So far I have the hardware made and will be getting the details coated with anodize and Cad plate.
Allan G.