Trying to get all my parts together to put motor back together and I'm thinking about changing cams.
Stock crank, rods, pistons. I put a GN107 from postons in car a while back (which I think is a 202-202) and want to change it out.
Which cam would be best for a TE61, 3200 stall, G-body Strecthed Inter., port mached intake and ported iron heads with 3 angle valve job (stock valves) and 100# springs.
girdle and razor's alky kit being added to combo
When car was running, car seemed to die on top end with current cam, no mph.
Stock crank, rods, pistons. I put a GN107 from postons in car a while back (which I think is a 202-202) and want to change it out.
Which cam would be best for a TE61, 3200 stall, G-body Strecthed Inter., port mached intake and ported iron heads with 3 angle valve job (stock valves) and 100# springs.
girdle and razor's alky kit being added to combo
When car was running, car seemed to die on top end with current cam, no mph.